Established in 1974, Flexibles has been a pioneer in manufacturing a wide variety of FLEXIBLE Hose Assemblies. Hose Experts at Flexibles offer our line of FlexAll Hydraulic & other Industrial Hoses.
Our Factory is currently located in faridabad, Haryana & is equipped with all facilities for manufacturing high quality Flexible hoses complete with end connections as per your requirement.
FlexAll-Hydraulic Hoses SAE 100R1AT/1SN | Medium Pressure
Meets or exceeds the performance requirements of: SAE 100R1AT,Din EN 853 1SN
Application: Medium pressure hydraulic applications including hydraulic fluids, hot oil, grease, lubricant & crude Oils, air & water.
Inner Tube : Oil resistant Nitrile (BTR) tube.
Reinforcement : Single braid high-tensile steel wire reinforcement.
Cover Compound: Oil & abrasion-resistant, black Neoprene (CR) Cover.
Temperature Range:- 40c to 120c
Technical Specifications:
| Hose Id | Wire OD | Hose OD | Working Pressure | Burst Pressure | Minimum Bend Radius | Weight | |||
| inch | mm | mm | mm | Mpa | Psi | Mpa | Psi | mm | Kg/m |
| 3/16 | 4.8 | 9.5 | 11.8 | 25 | 3630 | 100 | 14280 | 90 | 0.190 |
| 1/4 | 6.4 | 10.8 | 12.8 | 22.5 | 3270 | 90 | 12840 | 100 | 0.222 |
| 5/16 | 7.9 | 12.5 | 14.5 | 21.5 | 3120 | 85 | 12280 | 115 | 0.261 |
| 3/8 | 9.5 | 14.6 | 16.8 | 18 | 2610 | 72 | 10280 | 130 | 0.324 |
| 1/2 | 12.7 | 17.6 | 19.8 | 16 | 2320 | 64 | 9180 | 180 | 0.418 |
| 5/8 | 15.9 | 21.1 | 23.1 | 13 | 1890 | 52 | 7420 | 200 | 0.476 |
| 3/4 | 19.0 | 24.7 | 27.0 | 10.5 | 1530 | 42 | 6000 | 240 | 0.619 |
| 1 | 25.4 | 32.5 | 35.0 | 8.8 | 1280 | 35 | 5020 | 300 | 0.883 |
| 1-1/4 | 31.8 | 39.5 | 43.5 | 6.3 | 920 | 25 | 3600 | 420 | 1.220 |
| 1-1/2 | 38.1 | 45.8 | 49.8 | 5 | 730 | 20 | 2860 | 500 | 1.408 |
| 2 | 50.8 | 59.0 | 63.0 | 4 | 580 | 16 | 2280 | 630 | 1.889 |
FlexAll-Hydraulic Hoses SAE 100R2AT / 2SN | High Pressure
Meets or exceeds the performance requirements of:SAE 100R2AT, DIN EN 853 2SN
Application:High pressurehydraulic oil line, grease, lubricant, crude oils, air, water.
Inner Tube:Oil resistant Nitrile (BTR) tube.
Reinforcement:Two braids of high-tensile steel wire.
Cover Compound: Abrasion & weather resistant synthetic rubber. MSHA accepted.
Temperature Range: -40c to + 120c.
Technical Specifications:
| Hose ID | Wire OD | Hose OD | Working Pressure | Burst Pressure | Minimum Bend Radius | Weight | |||
| inch | mm | mm | mm | Mpa | Psi | Mpa | Psi | mm | Kg/m |
| 3/16 | 4.8 | 11.1 | 13.4 | 41.4 | 6000 | 165 | 23720 | 90 | 0.310 |
| 1/4 | 6.4 | 12.6 | 14.6 | 40 | 5800 | 160 | 22840 | 100 | 0.342 |
| 5/16 | 7.9 | 14.3 | 16.3 | 36 | 5250 | 140 | 20000 | 115 | 0.403 |
| 3/8 | 9.5 | 16.4 | 18.6 | 33.1 | 4800 | 132 | 18840 | 130 | 0.491 |
| 1/2 | 12.7 | 19.4 | 21.6 | 27.6 | 4000 | 110 | 15720 | 180 | 0.646 |
| 5/8 | 15.9 | 22.9 | 24.9 | 25 | 3630 | 100 | 14280 | 200 | 0.733 |
| 3/4 | 19.0 | 26.5 | 28.8 | 21.5 | 3120 | 85 | 12280 | 240 | 0.929 |
| 1 | 25.4 | 34.2 | 36.8 | 16.5 | 2400 | 65 | 9420 | 300 | 1.334 |
| 1-1/4 | 31.8 | 41.3 | 45.3 | 12.5 | 1820 | 50 | 7140 | 420 | 1.684 |
| 1-1/2 | 38.1 | 47.8 | 51.8 | 9 | 1310 | 36 | 5140 | 500 | 1.918 |
| 2 | 50.8 | 61.0 | 65.0 | 8 | 1160 | 32 | 4560 | 630 | 2.559 |
FlexAll-Hydraulic Hoses EN 856 4SP | Very High Pressure
Meets or exceeds the performance requirement of:EN 856 4SP, DIN 20023 4SP, R9R
Application: Very high pressure applications used for petroleum based hydraulic fluids.
Inner Tube: Neoprene.
Reinforcement: Four alternating layers of spiralled high-tensile steel wire.
Cover Compound: abrasion and weather resistant synthetic rubber.
Temperature Range: -40c to +-125c.
Technical Specifications:
| Hose ID | Wire OD | Hose OD | Working Pressure | Burst Pressure | Minimum Bend Radius | Weight | |||
| inch | mm | mm | mm | Mpa | Psi | Mpa | Psi | mm | Kg/m |
| 3/8 | 9.5 | 17.5 | 21.3 | 45.0 | 6500 | 180 | 26000 | 180 | 0.751 |
| 1/2 | 12.7 | 20.4 | 24.4 | 41.5 | 6000 | 166 | 24000 | 230 | 0.943 |
| 5/8 | 15.9 | 23.7 | 28.1 | 35.0 | 5000 | 140 | 20000 | 250 | 1.269 |
| 3/4 | 19.0 | 28.2 | 32.0 | 35.0 | 5000 | 140 | 20000 | 300 | 1.450 |
| 1 | 25.4 | 35.0 | 39.0 | 28.0 | 4000 | 112 | 16000 | 340 | 2.178 |
| 1-1/4 | 31.8 | 46.0 | 49.39 | 21.0 | 3000 | 84 | 12000 | 460 | 2.825 |
| 1-1/2 | 38.1 | 52.4 | 57.0 | 18.5 | 2700 | 74 | 10800 | 560 | 3.441 |
| 2 | 50.8 | 65.4 | 70.8 | 16.5 | 2400 | 66 | 9600 | 600 | 4.764 |
FlexAll-Hydraulic Hoses EN 856 4SH | Very High Pressure
Meets or exceeds the performance requirements of: EN 856 4SH, DIN 20023 4SH
Application: Very high pressure, pulsating applications used for petroleum based hydraulic fluids.
Inner Tube: Neoprene.
Reinforcement: Four alternating layers of spiralled high-tensile steel wire.
Temperature Range: -40c to +125c.
Technical Specifications:
| Hose ID | Wire OD | Hose OD | Working Pressure | Burst Pressure | Minimum Bend Radius | Weight | |||
| inch | mm | mm | mm | Mpa | Psi | Mpa | Psi | mm | Kg/m |
| 3/4 | 19.0 | 28.2 | 32.0 | 45.0 | 42.0 | 6090 | 168 | 24000 | 280 |
| 1 | 25.4 | 35.0 | 38.1 | 38.0 | 5500 | 152 | 22000 | 340 | 2.178 |
| 1-1/4 | 31.8 | 42.2 | 45.2 | 32.5 | 4700 | 138 | 18800 | 460 | 2.825 |
| 1-1/2 | 38.1 | 49.0 | 53.5 | 29.0 | 4200 | 116 | 16800 | 560 | 3.441 |
| 2 | 50.8 | 63.5 | 68.0 | 25.0 | 3600 | 100 | 14400 | 700 | 4.764 |
HYDRAULIC RUBBER HOSE
These are manufactured from oil resistant synthetic rubber with high tensile steel or rayon braided reinforcements in 
all sizes from 3/16’’ ID 4’’ and in long lengths. These are used for conveying hydraulic oils, fuel oils, gasoline, air and water etc. at low pressure/, mediumpressure/high pressure and super high pressure upto 1400Kg/cm.
These are available in different categories, being R3,R5,4-SP,4-SH,6-SP,R1,R2 ,R3,R4,R12,R13,R16,R17,R19,etc. These are supplied with end fittings/connections as per customers requirements.
STEAM HOSE ASSEMBLIES
These are used for conveying steam for hydraulic presses, refineries and related application through flexible pipes in which steam pressure does not exceed 17.6 Kg/cm (250psi) and temperature does not exceed 230C.
These are available in all size from 3/8’’ NB to 2’’ NB. These are supplied with complete end fittings/connections as per customers requirement.
RUBBER HOSE
MINING, DRILLING, LPG & Other Industrial Applications Hoses
We also supply hoses for impulsive high pressure application like excavators, dozers, dumpers, cranes, rock breakers, 
hydraulic drill rigs & other construction equipment.
Fire, ozone, abrasion resistant hose, hot water pressure cleaning hoses, steam hoses, LPG, CNG hoses, AIR CONDITIONING hoses, agricultural hoses, ROCKDRILL hoses, SEWER jetting hoses, CEMENT RIG hoses, Airo mine hoses, Water blast hoses etc
Hoses with very low MBR (Minimum Bend Radius) for short assembly length & narrow installation are also available.
Hoses are also available for petroleum based hydraulic fluids, synthetic esters, water-glycol based fluids etc.
CHEMICAL COMPOSITE HOSE
Chemical resistant composite hoses are made from POLYPROPYLENE, POLYESTER & POLYAMIDE fabrics and film material.
The hose consists of inner wire spiral, upon which layers of fabric & film are wrapped and bound with an external wire spiral.
The tension between each other of the wire spirals gives the hoses its pressure capability. The wire helixes can be galvanized steel, Aluminium, Stainless Steel or polypropylene coated steel.
Varieties of hoses are available for passage of different types of chemicals.
THERMOPLASTIC HOSE
Chemical resistant composite hoses are made from POLYPROPYLENE, POLYESTER & POLYAMIDE fabrics and film material.
The hose consists of inner wire spiral, upon which layers of fabric & film are wrapped and bound with an external wire spiral.
The tension between each other of the wire spirals gives the hoses its pressure capability. The wire helixes can be galvanized steel, Aluminium, Stainless Steel or polypropylene coated steel.
Varieties of hoses are available for passage of different types of chemicals.
